DIN Fastener

Details

• DIN-Cap nuts
• DIN-Castle nuts
• DIN-Clevis pins
• DIN-Clevis pins
• DIN-Knurled nuts
• DIN-Shim rings
• DIN-Slotted head screws
• DIN-Square head bolts
• DIN-Square nuts
• DIN-Tapping screws
• DIN-Thread forming screws
• DIN-Washers for use in structural steelwork
• DIN-Weld nuts
• DIN-Weld screws
• DIN-Wood screws
• DIN-Cross recessed head screws
• DIN-Double end studs
• DIN-Pins
• DIN-Nails
• DIN-Hexagon head bolts and screws
• DIN-Hexagon head bolts and screws for use in DIN-Structural steelwork
• DIN-Drilling screws with tapping screw thread
• DIN-Split pins
• DIN-Plain washers
• DIN-Hexalobular head bolts
• DIN-Prevailing torque type nuts
• DIN-Sepcial washers
• DIN-Miscellaneous bolts and screws
• DIN-Miscellaneous nuts
• DIN-Retaining rings
• DIN-Keys
• DIN 1-100
• DIN 1 – Taper Pins
• DIN 7 – Dowel Pins
• DIN 84 A – Slotted Cheese Head Machine Screws
• DIN 85 A – Slotted Pan Head Machine Screws
• DIN 93 – Tab Washers With Long Tab
• DIN 94 – Cotter Pins
• DIN 95 – Slotted Oval Head Machine Screws
• DIN 96 – Slotted Round Head Wood Screws
• DIN 97 – Slotted Flat Head Wood Screws
• DIN 101-200
• DIN 125 A – Flat Washer Without Chamfer
• DIN 125 B – Flat Washer With Chamfer
• DIN 126 – Grade C Flat Washer Without Chamfer
• DIN 127 A – Split Lock Washer With Bend Ends
• DIN 127 B – Split Lock Washer With Flat Ends
• DIN 128 A – Split Spring Washers, Curved
• DIN 128 B – Split Spring Washers, Waved
• DIN 137 A – Spring Washer, Curved
• DIN 137 B – Spring Washer, Waved
• DIN 186 A – Tee-Head Bolts With Square Head
• DIN 188 – Tee-Head Bolts With Double Nip
• DIN 193
• DIN 196
• DIN 301-400
• DIN 315 – Wing Nuts
• DIN 316 – Wing Screws
• DIN 401-500
• DIN 404 – Slotted Drilled Fillister Head Screws
• DIN 417 – Slotted set screws with full dog point
• DIN 427 – Slotted Headless Screws
• DIN 431 – Jam Nut, Hexagonal
• DIN 432 – External Tab Washer
• DIN 433 – Flat Washer With Reduced O.D.
• DIN 434 – Square Bevel Washer: 8%
• DIN 435 – Square Bevel Washer: 14%
• DIN 436 – Square Washer
• DIN 438 – Slotted set screws with cup point
• DIN 439 A – Hexagon Nuts – 0,5d Unchamfered
• DIN 439 B – Hexagon Nuts – 0,5d Chamfered
• DIN 444 A – Eye Bolts
• DIN 462 – Internal Tab Washers
• DIN 463 – Tab Washers With Long And Short Tab
• DIN 464 – Knurled Thumb Screws
• DIN 466 – Knurled Nuts, Full
• DIN 467 – Flat Knurled Nuts
• DIN 470 – Sealing Washers
• DIN 471 – External Retaining Rings
• DIN 472 – Internal Retaining Rings
• DIN 478 – Square Head Bolts
• DIN 479 – Square Head Bolts
• DIN 480 – Square Head Bolts
• DIN 501-600
• DIN 525 – Weld Studs With Hexagon Nuts
• DIN 529 A – Anchor Bolts (Stone Bolt)
• DIN 529 B – Anchor Bolts (Stone Bolt)
• DIN 529 C – Masonry Bolts With Hexagon Nuts
• DIN 529 D – Anchor Bolts (Stone Bolt)
• DIN 529 E – Foundation Bolts With Hexagon Nuts
• DIN 529 F – Anchor Bolts (Stone Bolt)
• DIN 529 G Bolt
• Din 546 – Slotted Round Nut
• DIN 547 – Round nuts with drilled holes in one face
• DIN 548 – Round nuts with set pin holes in side
• DIN 551 – Slotted Set Screws With Flat Point
• DIN 553 – Slotted Set Screws With Cone Point
• DIN 555 – Hexagon Nuts – 0,8d
• DIN 557 – Square Nuts
• DIN 558 – Fully Threaded Maching Bolts
• DIN 562 – Square Thin Nuts
• DIN 571 – Hexagon Lag Screws
• DIN 580 – Lifting Eye Bolts
• DIN 582 – Lifting Eye Nuts
• DIN 601-700
• DIN 601- Hexagon head bolt with nut
• DIN 603 Mu – Carriage Bolts With Hexagon Nuts
• DIN 604 – Flat Countersunk Nip Bolts With Hex Nuts
• DIN 605 – Flat Countersunk Square Neck Bolts
• DIN 607 – Round Head Nip Bolts With Nuts
• DIN 608 – Countersunk Square Bolts (Short Neck)
• DIN 609 – Hex Fitting Bolts w/long Threaded Portion
• DIN 610 – Hex fitting Bolts w/short Threaded Portion
• DIN 653 – Flat Knurled Thumb Screws
• DIN 660 – Round Head Rivets
• DIN 661 – Countersunk Head Rivets
• DIN 701-800
• DIN 705 A – Shaft Collars
• DIN 801-900
• DIN 835 Fo – Studs, Tap Ends – 2d
• DIN901-1000
• DIN 906 – Hexagon Socket Pipe Plugs
• DIN 908 – Hexagon Socket Screw Plugs
• DIN 910 – Hexagon Head Screw Plugs
• DIN 911 – Hexagon Socket Screw Keys
• DIN 912 – Socket Head Cap Screws
• DIN 913 – Socket Set Screws With Flat Point
• DIN 914 – Socket Set Screws With Cone Point
• DIN 915 – Socket Set Screws With Dog Point
• DIN 916 – Socket Set Screws With Cup Point
• DIN 917 – Hexagon Cup Nuts – Low Pattern
• DIN 920 – Slotted Pan Head Screws, Small Head
• DIN 921 – Slotted pan head screws with large head
• DIN 923 – Slotted Pan Head Screws With Shoulder
• DIN 927 – Slotted Shoulder Screws
• DIN 928 – Square Weld Nuts
• DIN 929 – Hexagon Weld Nuts
• DIN 931 – Hexagon Cap Screws Partially Threaded
• DIN 933 – Hexagon Cap Screws Fully Threaded
• DIN 933 Sz – Hexagon Cap Screws With Slot
• DIN 934 – Hexagon Nuts – 0,8d
• DIN 935 – Castle Nuts
• DIN 936 – Hexagon Jam Nuts
• DIN 937 – Hexagon Thin Slotted And Castle Nuts
• DIN 938 – Studs – Metal end ≈ 1 d.htm
• DIN 939 – Studs, Tap End – 1,25d
• DIN 960 – Hex Cap Screws, Metric Fine Thread – Part Thread
• DIN 961 – Hex Cap Screws, Metric Fine Thread – Full Thread
• DIN 963 A- Slotted Flat Head Machine Screws
• DIN 964 A- Slotted Oval Head Machine Screws
• DIN 965 A – Cross Recessed Flat Head Machine Screws
• DIN 966 A – Cross Recessed Oval Head Machine Screws
• DIN 980 V – Self-Locking Nuts; All Metal Conctruction
• DIN 982 – Self- Locking Nuts w/nylon Insert: Heavy Series
• DIN 985 – Self Locking Nuts w/locking Insert: Standard Series
• DIN 986 – Self Locking Domed Cap Nuts With Nylon Insert
• DIN 988 – Shim Washers
• DIN 1001-2000
• DIN 1052
• DIN 1440 – Flat Washers With Clevis Pins, Medium
• DIN 1441 – Flat Washers For Clevis Pins, Coarse
• DIN 1473 – Grooved Pins Full Length Paralled Grooved
• DIN 1475 – Grooved Pins Third Length Center Grooved
• DIN 1476 – Round Head Grooved Pins
• DIN 1477 – Flat Countersunk Head Grooved Pins
• DIN 1480 – Turnbuckles
• DIN 1481 – Spring Ppins, Heavy Duty
• DIN 1587 – Hexagon Domed Cap Nuts, Full Pattern
• DIN 1804 w – Slotted Round Nuts
• DIN 2001-3000
• DIN 2093 A,B,C – Dics Springs (Belleville Type)
• DIN 2338 – Parallel Pin
• DIN 2339
• DIN 2509 – Double end studs
• DIN 2510
• DIN 3001-3999
• DIN 3570 – U Bows U Bolts
• DIN 6001-7000
• DIN 6319 – C D G Spherical washers and conical seats
• DIN 6325 – Parallel Pins Hardened
• DIN 6332 – Grub screws with thrust point
• DIN 6334 – Hexagon Nuts – 3d
• DIN 6796 – Conical Spring Washers (Belleville Type)
• DIN 6797 A+J – Internal/External Tooth Lock Washers
• DIN 6797 AZ – Tooth Lock Washers (Type AZ)
• DIN 6797 IZ – Tooth Lock Washers (Type JZ)
• DIN 6797 AZV – Tooth Lock Washers (Type AZV)
• DIN 6798 A+J – Serrated Lock Washers
• DIN 6798 AZV – Serrated Lock Washers (type AZV)
• DIN 6798 V – 90degree Countersunk Serrated Lock Washers
• DIN 6799 – Circlips For Shafts
• DIN 6885 A – Parallel Keys, Round Ended
• DIN 6885 B – Parallel Keys, Square Ended
• DIN 6911 – Hexagon Socket Screw Keys With Pilot
• DIN 6912 – Low Head Socket Cap Screws With Pilot
• DIN 6914 – Hex Bolts For High Strength Struct. Bolting
• DIN 6915 – Hex Nuts For High Strength Struc. Bolting
• DIN 6916 – Washers For High Strength Structural Bolting
• DIN 6917 – Square taper washer for -sections 14%
• DIN 6918 – Square taper washer for U-sections
• DIN 6921 – Hex Flange Bolts
• DIN EN 1665 Hexagon bolts with flange – heavy series(Replace DIN 6922)
• DIN 6923 – Hexagonal Flange Nuts
• DIN 6924 Prevailing torque type hexagon nut with nylon insert ISO 7040
• DIN 6925 – Prevailing torque type hexagon nut all metal
• DIN 6926 – Self-Locking Hex Flange Nuts: Non Metallic Insert
• DIN EN 1663 – Prevailing torque type hexagon nuts with flange with non-metallic insert
• DIN 7001-8000
• DIN 7338 – Rivets for brake linings and clutch linings
• DIN 7343 – Coiled Pins, Medium Duty
• DIN 7349 – Flat Washers With Large Ext. Diameter
• DIN 7504 – N P K head self drilling screws
• DIN 7968 – Hexagon fit bolts with hexagon nut for steel structures
• DIN 7969 – Slotted countersunk head bolts with hexagon nut for steel structures
• DIN 7970 – Tapping screw threads
• DIN 7978 A – Taper PIns With Internal Thread
• DIN 7979 D – Dowel Pins With Internal Thread
• DIN 7980 – Hi-Collar Lock Washers
• DIN 7981 B(BZ) – Cross Recessed Pan Head Tapping Screws
• DIN 7982 B – Cross Rec. Flat hd Tapping Screws, hd Angle 80
• DIN 7983 B – Cross Rec. Oval hd Tapping Screw, hd Angle 80
• DIN 7984 – Socket Low Head Cap Screws
• DIN 7985 A – Cross Recessed Pan Head Machine Screws
• DIN 7985 Z1 – Cr. Rec. Pan Head Screws w/captive Flt. Washer
• DIN 7985 Z4 – Cr. Rec. Pan Head Screws w/captive l/washer
• DIN 7989 A – Washers For Steel Constructions
• DIN 7991 – Flat Socket Head Cap Screws
• DIN 7997 – Cross recessed countersunk head wood screws
• DIN 7998 – Threads and Thread Ends for Wood Screws
• DIN 9001-9999
• DIN 9021
• DIN 9250 Safety lock serrate washer
• DIN EN 22339 – Unhardened Taper Pins (Replace DIN 1)